Proxmox Firewall: Locking Down Your Homelab at the Datacenter, Node, and VM Level

Proxmox ships with a real, iptables-backed firewall built into the platform, and most homelabs never turn it on. It’s not enabled by default at any level, so unless you’ve gone looking for it in the UI, there’s a good chance your VMs and containers are sitting behind nothing but whatever VLAN segmentation you’ve set up, if any. That’s often fine. It stops being fine the moment you’re running something internet-facing, or you want one VM to be reachable only from your management network and nowhere else, or a compromised guest shouldn’t be able to freely talk to everything else on its VLAN just because they share a broadcast domain. This is what the built-in firewall is actually for, and it’s worth understanding the shape of it before you flip it on. ...

September 19, 2026 · 7 min

Migrating from VMware ESXi to Proxmox: What Actually Breaks (and How to Avoid It)

The Proxmox-vs-ESXi comparison on this site already covers why so many homelabbers are moving off VMware since the Broadcom licensing changes gutted the free ESXi tier. This one skips the “should I switch” question and gets into the part that actually trips people up: what breaks when you move a real VM from ESXi to Proxmox, and how to get ahead of it instead of debugging a guest that won’t boot at 11pm. ...

September 15, 2026 · 7 min

Sizing a UPS for Your Homelab (and Setting Up NUT for Automatic Shutdown)

A UPS without a way to talk to your hosts is just an expensive surge protector with a battery in it. It’ll keep the lights on for a few minutes, but the moment that battery runs out, every VM and container you’re running goes down exactly as hard as it would have without a UPS at all, just a little later. The part that actually protects you, a UPS that tells your hosts “power’s out, shut down now while you still can,” is a separate piece of software most people never get around to setting up. Here’s how to size the UPS itself, and how to wire up Network UPS Tools (NUT) so an outage ends in a clean shutdown instead of a dirty one. ...

September 12, 2026 · 9 min

Proxmox VM Templates: Automating Deployment with Cloud-Init

Every homelab operator hits the same wall eventually: you need a fifth Ubuntu VM for some new service, and the thought of walking through another OS installer, setting the hostname, adding your SSH key, and running updates makes you want to just leave the last one running forever instead. Cloud-init templates fix this. Build the template once, and every new VM after that is a clone plus a few lines of config, done in under a minute instead of fifteen. This is the same workflow cloud providers use to spin up instances on demand, and Proxmox supports it natively, no extra tooling required to get the basics working. ...

September 11, 2026 · 7 min

IPMI, iDRAC, and iLO: Setting Up Out-of-Band Management for a Headless Homelab

Most homelab hardware guides stop at “buy it, rack it, install Proxmox.” The thing that actually changes how a homelab feels to run day to day is whether you can reach the machine when the OS won’t boot, the network stack is misconfigured, or the box is three rooms away in a closet with no monitor attached. That’s what out-of-band management is for, and if you’re running used enterprise gear, you almost certainly already own it. Most people never turn it on. ...

September 8, 2026 · 8 min

Ceph in Proxmox: When Hyperconverged Storage Actually Makes Sense at Home

Ceph shows up in every “how do I get real shared storage for my Proxmox cluster” conversation, and for good reason, it’s the one option that’s fully native, fully integrated into the Proxmox web UI, and genuinely production-grade software running underneath some very large real-world deployments. It’s also the option most likely to leave a home cluster worse off than before you added it, because Ceph’s design assumptions (plenty of nodes, plenty of network, plenty of dedicated drives) don’t bend easily to a 3-node home lab built from whatever hardware was on hand. Here’s what Ceph actually is inside Proxmox, what it needs to run well, and when it’s the right call instead of the simpler alternatives. ...

September 7, 2026 · 8 min

HBA Cards and IT Mode Flashing: The Real Way to Connect a Homelab's Worth of Drives

Every data hoarder eventually hits the same wall: the motherboard only has six SATA ports, and the build calls for twelve drives. The instinctive fix is a cheap RAID card off eBay, and that instinct is almost always wrong. The actual answer, in nearly every homelab storage build, is an HBA flashed to IT mode. Here’s what that means, why it matters, and how to do it without turning a $40 card into a paperweight. ...

September 4, 2026 · 7 min

Proxmox GPU Passthrough: VM PCIe Passthrough vs LXC Device Passthrough

Buying the right GPU for your homelab is one decision. Getting Proxmox to actually hand that GPU to a VM or container is a separate one, and it’s where a lot of people get stuck, because Proxmox actually supports two completely different ways to do it, and picking the wrong one for the job means either a fight with IOMMU groups you didn’t need to have, or a container that can’t do what you needed a full GPU for. Here’s what each path actually requires, and how to pick between them. ...

September 3, 2026 · 7 min

How Much RAM Does Your Homelab Actually Need (and Is ECC Worth It)?

RAM is one of the easiest specs to either badly underbuy or badly overbuy in a homelab, because the honest answer to “how much do I need” is “it depends on what you’re actually running,” and most buying guides dodge that and just tell you to get 32GB or 64GB and move on. That’s not wrong exactly, but it skips the reasoning that lets you size correctly for your own setup instead of someone else’s. Here’s how to actually work it out, plus the ECC question that comes up right behind it. ...

August 31, 2026 · 7 min

Proxmox Clustering: When a Multi-Node Cluster Is Actually Worth It at Home

Proxmox makes joining a second node to a cluster look almost too easy, one command on the joining node and you’re done, centralized management across both boxes in the web UI. What that quick setup doesn’t make obvious is how much more you need to build on top of it before a cluster gives you the thing most people actually want from one: automatic failover when a node dies. This is the gap that catches people, they cluster two or three nodes, assume they now have redundancy, and find out during an actual outage that a VM doesn’t restart anywhere because nothing was wired up to make that happen. Here’s what clustering actually gets you, what it costs, and an honest read on whether it’s worth doing in a home setup versus running solid standalone nodes. ...

August 30, 2026 · 8 min