Prebuilt NAS vs DIY NAS: Picking Your Homelab Storage Hardware Platform

Every “what NAS should I buy” thread ends up the same way: half the replies say “just get a Synology,” the other half say “why would you pay that much for repackaged PC parts, build your own.” Both sides are right about their own priorities and talking past the other person’s. This isn’t a question with one correct answer, it’s a question about which tradeoffs you’re actually willing to live with. ...

November 15, 2026 · 6 min

Raspberry Pi and SBCs for Your Homelab: When They Actually Make Sense

A Raspberry Pi (or one of the many ARM and low-power x86 boards that compete with it) ends up in most homelabs eventually, usually running Pi-hole, a single sensor-reading job, or sitting in a drawer after an abandoned project. Few people run their whole stack on one, and that’s correct, but “not your main box” and “not worth having” are very different conclusions. The useful question is which specific jobs a single-board computer (SBC) is actually the right tool for, and which jobs people keep trying to force onto one when a mini PC would save them the trouble. ...

November 11, 2026 · 7 min

Thunderbolt and USB4 Networking: A Cheap, Fast Interconnect for Small Homelab Clusters

Mini PCs and NUC-style nodes keep showing up as the default homelab building block on this site, and most of them ship with Thunderbolt 4 or USB4 ports that never get used for anything but an external drive. Those ports are capable of carrying IP traffic directly between two machines, no switch required, at speeds a 2.5GbE or even 10GbE port can’t touch for the price. It’s a real option for a small Proxmox or TrueNAS cluster sitting on a desk, not a parlor trick, but it comes with sharp edges that the glossy “40Gbps!” marketing number doesn’t mention. ...

November 7, 2026 · 6 min

Power over Ethernet for Your Homelab: Switches, Injectors, and Budgeting the Watts

The managed-switch buying guide on this site mentions PoE as one line item to decide up front, since PoE switches cost more and aren’t something you bolt on later. That’s true, but it skips past the part that actually trips people up once PoE gear is already in the rack: the standards are confusing, “PoE switch” doesn’t mean “powers anything you plug into it,” and the failure mode when you get the budget wrong isn’t a clean error message, it’s a device that reboots randomly or just never comes up at a weird port. ...

November 3, 2026 · 6 min

Choosing a Server Chassis: 1U vs 2U vs 4U, Airflow, and Drive Bay Layout

The rack article on this site covers the cabinet: depth, rails, PDU, cable management. This one covers the thing that actually goes into the rack, the chassis itself, and it’s a separate decision with its own traps. A rack sized right for a server that turns out to have the wrong airflow direction, too few drive bays, or a riser that won’t clear a double-width GPU is still a wasted purchase, just one layer in from the one the rack article warns about. ...

October 30, 2026 · 7 min

PCIe Bifurcation and M.2 Expansion Cards: Getting More NVMe Slots Out of a Consumer Motherboard

The CPU and motherboard article on this site already covers how PCIe lane budgets get tight on a consumer platform once a GPU, an HBA, and a NIC are all fighting for slots. This piece is about the thing people reach for once that budget is spent: PCIe expansion cards that turn a single slot into multiple M.2 NVMe slots. Some of these cards work in any PCIe slot on any board. Others need a specific motherboard feature called bifurcation, and buying the wrong card for your board is a common, entirely avoidable way to end up with an expensive piece of plastic that Windows or Linux only sees one drive on. ...

October 26, 2026 · 7 min

Choosing a Network Interface Card for Your Homelab: Chipsets, Drivers, and Why Not All NICs Are Equal

The 10GbE and SFP+ articles on this site both assume you already have a network card worth plugging something into. That’s not always true. Plenty of homelab trouble that looks like a cabling problem, a switch problem, or a flaky driver is actually a bad NIC choice from the start, usually an onboard chipset that was never meant to run under constant load with a hypervisor’s network stack sitting on top of it. This is the piece that covers the card itself: which chipsets to trust, which to avoid, and what actually matters when you’re picking an add-in NIC for Proxmox, TrueNAS, or any other self-hosted box. ...

October 22, 2026 · 7 min

SFP+ Transceivers and DACs: Making Sense of Fiber and Copper Networking for Your Homelab

The managed-switch and 10GbE articles on this site both talk around one thing without ever explaining it: the actual port you plug 10GbE gear into usually isn’t RJ45. It’s SFP+, a small rectangular slot that takes a separate module, and that module is where most people buying their first piece of 10GbE gear get stuck. This is the piece that fills that gap: what SFP+ actually is, the three ways to fill one, and the specific mistakes that turn a cheap used switch into a pile of ports that won’t link up. ...

October 18, 2026 · 7 min

KVM Switches, Crash Carts, and PiKVM: Physical Console Access When Your BMC Isn't There to Save You

The out-of-band management article on this site covers IPMI, iDRAC, and iLO, the built-in remote console that real server motherboards ship with. That’s the right answer for a lot of homelab hardware. It is not the answer for all of it. Mini PCs, most consumer desktop motherboards, a lot of budget NAS boards, and the occasional used server where the BMC itself has quietly died, all have zero out-of-band path. When one of those needs a monitor and keyboard in front of it, which eventually happens to every piece of hardware you own, you need a different plan. ...

October 14, 2026 · 8 min

Power Supplies for Your Homelab: 80+ Efficiency, Redundant PSUs, and Server PSU Quirks

Every build guide tells you to “get a good power supply” and leaves it there, as if that settles the question. It doesn’t. A PSU is the one component that touches every watt your homelab ever draws, and the difference between a cheap unit and a good one shows up as heat, noise, and a power bill you can actually measure, not just a line on a spec sheet. This is the PSU side of the picture: what the efficiency ratings mean, how server PSUs differ from the ATX unit in a tower build, and what redundant power supplies actually buy you once you start running used enterprise gear. ...

October 10, 2026 · 7 min