Proxmox Clustering: When a Multi-Node Cluster Is Actually Worth It at Home

Proxmox makes joining a second node to a cluster look almost too easy, one command on the joining node and you’re done, centralized management across both boxes in the web UI. What that quick setup doesn’t make obvious is how much more you need to build on top of it before a cluster gives you the thing most people actually want from one: automatic failover when a node dies. This is the gap that catches people, they cluster two or three nodes, assume they now have redundancy, and find out during an actual outage that a VM doesn’t restart anywhere because nothing was wired up to make that happen. Here’s what clustering actually gets you, what it costs, and an honest read on whether it’s worth doing in a home setup versus running solid standalone nodes. ...

August 30, 2026 · 8 min

Proxmox Networking: Bridges, Bonds, and VLANs for Your Homelab

Proxmox sets up a single bridge during install, vmbr0, hands every VM and container a virtual NIC on it, and most homelabs never touch networking again after that. That’s fine right up until you want to keep your NAS traffic off the same broadcast domain as a VM you don’t fully trust, or you add a second NIC and aren’t sure whether to bond it or split it out, or you’re staring at a VLAN dropdown in the VM hardware tab with no idea what happens if you fill it in wrong. None of this is complicated once you see the shape of it, but Proxmox’s networking config is also one of the few places where a bad change locks you out of the box that’s hosting the config, so it’s worth understanding before you’re mid-edit over SSH. ...

August 26, 2026 · 7 min

LXC vs VM: Choosing the Right Proxmox Container Type for Your Homelab Workload

Proxmox hands you two completely different ways to run a workload, LXC containers and full VMs, and the “New CT” and “Create VM” buttons sit right next to each other in the UI like the choice barely matters. It matters. Pick the wrong one for a given workload and you’ll either waste resources you didn’t need to waste, or hit a wall six months in when something a container fundamentally can’t do turns out to be exactly what you needed. Here’s how to actually decide, workload by workload, instead of defaulting to whichever one you set up first. ...

August 25, 2026 · 6 min

ZFS Storage in Proxmox: Picking a Pool Layout You Won't Regret Later

Proxmox will let you install onto ZFS during setup with a few checkboxes and move on with your life, and that’s exactly how a lot of people end up with a storage layout they didn’t actually choose. ZFS is the best storage option built into Proxmox for most homelab setups, but it comes with tradeoffs that are easy to ignore during install and expensive to fix once you’ve got VMs and containers living on top of it. Here’s what the pool layout choices actually mean, what ZFS does to your RAM, and how to pick a shape you won’t be re-doing in six months. ...

August 19, 2026 · 7 min

Proxmox Backup Server: Setting Up Automated, Deduplicated Backups for Your Homelab

Backups are the thing every homelab guide tells you to do and almost nobody actually verifies works until the day they need it. Proxmox makes this easier than most platforms because it ships a real backup product, Proxmox Backup Server (PBS), instead of leaving you to bolt one on yourself. Here’s how to actually set it up, what it buys you over the built-in vzdump backups, and the one step most people skip that makes the whole thing worthless if you never do it. ...

August 13, 2026 · 7 min

Proxmox vs ESXi vs XCP-ng: Which Hypervisor Should You Actually Run at Home in 2026?

Updated Aug 12, 2026: expanded with licensing detail, backup tooling, migration notes, and a decision table. Every homelab thread eventually turns into a hypervisor argument. Here’s the practical version, based on what actually matters when it’s your own gear and your own time on the line. The short answer If you’re starting fresh in 2026, run Proxmox VE. It’s free, actively developed, has a real community, and does everything most home labs need - VMs, LXC containers, clustering, ZFS, and a web UI that doesn’t feel like an afterthought. The rest of this post is for the “but why” crowd. ...

August 11, 2026 · 5 min